Windsor CB20 Instruções de Operação descarregar pdf (Página 10)

HOW THIS MACHINE WORKS

86306300 CHARIOT BURNISHER 11/18/09

3-3

The Chariot is a battery powered, self propelled,

hard floor burnisher intended for commercial use.

The appliance spins a high-speed burnishing pad in

contact with the floor surface to produce a high

luster shine.

The machines primary systems are the burnishing

system, the dust control system and the operator

control system.

The function of the burnishing system is to spin a

high-speed burnishing pad in contact with a floor

surface that has had a burnishable floor finish

applied. The burnishing pad can be lowered to the

floor and raised by the operator, the operator can

also control the pad pressure by use of the control

knob. The burnishing pad will spin only when the

machine is directed to move by the operator.

The function of the dust control system is to collect

the dust that is created during the burnishing

process. It is normal for a portion of the floor finish to

be removed in the form of dust during the process.

While burnishing, air movement is created within the

burnishing head by the spinning pad. The dust that

is also created is entrained in the air stream and

transported to a filter bag where it is collected and

separated from the air stream. The filter bag can be

easily changed without releasing the collected dust.

The function of the operator control system is to

control the direction and speed of the machine. The

directional control system consists of the direction

control switch, throttle pedal, speed control switch,

drive reset switch, emergency stop/brake switch,

steering wheel, propel controller, drive wheel and

operator presence pedal prior to Serial Number

(4*).The directional control switch signals forward or

reverse direction. The controller interprets signals

from the throttle pedal to command the drive wheel

to propel or slow the machine. The drive reset switch

is to make sure the operator is on platform before

machine will propel. The steering wheel points the

drive wheel in the direction desired by the operator.

The parking brake automatically engages when the

operator steps off the platform. The emergency

stop/brake can be used to hold the machine on

slopes.

*SEE SERIAL NUMBER PAGE.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 102 103

Comentários a estes Manuais

Sem comentários

Windsor CB20 Instruções de Operação Página 10

Comentários a estes Manuais

Manuais e produtos relacionados com Esfregão Windsor CB20