Windsor CS24SP Manual do Utilizador Página 38
- Página / 61
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
MAINTENANCE-SCRUB DECK - DISK
86037660 CHARIOT 11/09/06
4-11
Do not use a pressure
washer to clean around
the brush motors. Use tap pressure only.
TO REPLACE SCRUB BRUSH MOTORS
1. With the scrub deck in the raised position,
disconnect brush motor wiring connector from
harness.
2. Remove skirts from scrub deck to access and
remove scrub brushes or pad drivers.
3. Remove Aqua-Mizers™ from scrub deck.
4. Remove retaining bolt, lock washer, flat washer
and star drive from brush motor shaft.
5. Remove 4 brush motor mounting bolts located
under scrub deck.
6. Lower scrub deck.
7. Remove brush motor.
8. Reverse steps to install.
BRUSH MOTOR CARBON BRUSH
REPLACEMENT
1. Scribe alignment mark on motor barrel to motor
cap. Remove two bolts.
2. Remove end cap from motor.
NOTE: Motors contain two wave washers in
cap. Do not lose these.
3. Release brush from spring tension. Remove
screw connecting brush wire lead to brush
holder. Clean brush holder to insure free
movement.
4. Retract spring and install new brush. Install
connector screw and lead.
5. When all new brushes are installed. Place all in
retracted position, held into brush holder by
spring tension.
6. Carefully place end cap onto bearing on motor
shaft.
NOTE: Use care to assure wave washer
alignment.
7. With end cap in partially installed position,
release all brushes to contact position with
motor commutator.
NOTE: Failure to insure all brushes are released
will result in motor failure.
8. Reset end cap and realign with scribe marks on
motor barrel. Reinstall the two attach bolts from
cap into base.
9. Maintain alignment between motor barrel base
and cap.
- Operating Instructions (ENG) 1
- MACHINE DATA LOG/OVERVIEW 2
- TABLE OF CONTENTS 3
- HOW TO USE THIS MANUAL 4
- SAVE THESE INSTRUCTIONS 5
- HAZARD INTENSITY LEVEL 6
- SAFETY LABEL LOCATION 7
- TECHNICAL SPECIFICATIONS 8
- HOW THIS MACHINE WORKS 10
- COMPONENTS 11
- DRIVE CONTROLS 12
- 86037660 CHARIOT 11/09/06 16
- SCRUB CONTROLS-DELUXE 18
- SCRUB CONTROLS-SQUEEGEE 20
- MACHINE OPERATION 22
- MAINTENANCE 28
- MAINTENANCE-BATTERIES 29
- MAINTENANCE-SQUEEGEE 33
- MAINTENANCE-SCRUB BRUSHES 36
- SCRUB HEAD-CYLINDRICAL 41
- SCRUB BRUSH REPLACEMENT 41
- DUMPING HOPPER 42
- SCRUB DECK ADJUSTMENT 42
- BRUSHES 42
- BRUSH MOTOR CARBON BRUSH 43
- REPLACEMENT 43
- ACTUATOR SCRUB DECK 44
- REMOVAL/REPLACEMENT 44
- 86037660 CHARIOT 01/03/08 46
- 2. Vacuum motor 49
- RECOVERY TANK FLOAT SHUT-OFF 50
- 1. Drive motor 51
- 2. Parking brake 51
- 3. Drive chain 51
- To disengage brake: 52
- MAINTENANCE-BAG REPLACEMENT 54
- TIE DOWN POINTS 55
- MACHINE TROUBLESHOOTING 56
- CONTROLLER FAULT CODES 59
- NOTES: 61
Manuais e produtos relacionados com Esfregão Windsor CS24SP
Esfregão Windsor COMPACT PTC20 Manual do Utilizador
(15 páginas)
(15 páginas)
Esfregão Windsor 10080480 Manual do Utilizador
(69 páginas)
(69 páginas)
Esfregão Windsor VOYXDU 10086150 Manual do Utilizador
(136 páginas)
(136 páginas)
Esfregão Windsor D250 (115V) Manual do Utilizador
(20 páginas)
(20 páginas)
Esfregão Windsor CVX28 Manual do Utilizador
(68 páginas)
Sharp MD-DR470H manuali
Manuali dei proprietari e guide per l'utente per Lettori DVD Sharp MD-DR470H.
We fornisce manuali pdf Sharp MD-DR470H per scaricare gratuitamente in base al tipo di documento:
Comentários a estes Manuais