Windsor CBE20 Instruções de Operação descarregar pdf (Página 34)

Maintenance

Troubleshooting

PROBLEM CAUSE

SOLUTION

No power to machine Battery disconnected Check all battery cable connections

Emergency shut-off activated Reset

Battery cables corroded Clean connections

Faulty key switch Replace switch

Little or no propel Low battery charge Charge batteries

Machine turned on with pedal not in

neutral position

Allow pedal to return to neutral. Restart

Tripped circuit breaker Reset circuit breaker

Controller overheated Allow cool down period

Loose motor connection

Check wires and connections from

controller to motor

Faulty throttle circuit or potentiometer

Check wires and connections from

throttle to controller and potentiometer

resistance

Faulty drive reset circuit or switch Check wires, connections and switch

Faulty platform circuit or switch Check wires, connections and switch

Brake over-ride engaged Disengage brake over-ride

Faulty brake circuit or over-ride switch

Check wires, connections and switch

Forward speed only

Reverse speed only

Faulty forward/reverse switch Replace switch

Deck won't go up or down Circuit breaker tripped Reset circuit breaker

Pad motor won't run Circuit breaker tripped Reset circuit breaker

Faulty switch or connection Check switch or connections

Faulty relay Check pad motor relay

Deck vibrates Pad off center

Re-center or replace pad using pad

install tool

Dust leaks from skirts Dust hose blocked Check for blockage and clear if needed

86345050 Chariot Burnisher

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 105 106

Sem comentários

Windsor CBE20 Instruções de Operação Página 34